PVC Powder High Speed Blender

  • Model NO.: SHR
  • Working: High Speed Mixer
  • Application: Powder, Viscous Fluid
  • Application Area: Chemical
  • Mixing Drum Shape: Disc
  • Operating type: Cycle Operating
  • Item: Shr Series High Speed Mixer
  • Volume: 10-2500L
  • Control Method: Two Speed Motor or Inverter
  • Discharging Method: Hand or Cylinder
  • Sample Model: Shr-200A
  • Trademark: Chenxing
  • Specification: 10l-2500L volume
  • HS Code: 8477800000
  • Mixer Type: Powder Mixer
  • Stirring Type: Spiral
  • Certification: CE
  • Layout Type: Verticle
  • Additional Capabilities: Coating
  • Condition: New
  • Color: Standard or Customized
  • Main Motor Power: 3kw-185kw
  • Heating Method: Electric or Self-Friction
  • Mixing Time: 8-12 Min/Pot
  • Blades: 2-4 Pieces or Disc Blades
  • Transport Package: Wooden Case Packing
  • Origin: Original
PVC Powder high speed blender / plastic machine pvc resin powder turbor mixer for extrusion,injection production

I. plastic machine pvc resin powder turbor mixer for extrusion,injection production lines  is widely used to compound PVC resin with stabilizer and some other additives in the industry of PVC extrusion, PVC pelletizing/granulating and so on. it's necessary machine for PVC products production.

II. Features of plastic machine pvc resin powder turbor mixer for extrusion,injection production :
1.  for model smaller than 500litre model, the mixer barrel adopts 5mm stainless steel, bottom adopts 6mm stainless steel, it's stronger and durable. For model bigger than 500L, the more bigger, more thickness of bareel wall.
2. the mixer exhausing filter adopts very good air filter used for car, the air exhausting effect is much more better than cloth bag filter.
3.  hot mixer blades are well desgined which can save mixing time by 2mintues for one batch.
4. Our mixers have been passed the test of dynamic balance and static balance to reduce vibration.
5. The pot wall is accurate grinding so that mixed materials will not stick to the pot. The main electricity use Siemens.  
6. Temperature controller use HOLIP or Omron. The electric control cabinet is with fan and light. Shaft seal adopts patent technology to ensure the shaft and pot connection won't leak material.
7. The large mixer unit customers may choose ABB inverter and all our bearings use the famous brand bearing such as NSK, SKF that all depending on customers' requirements.
8. The stirring paddle is composed by up paddle, middle paddle and down paddle.
9. the stirring barrel with open cover, use air cylinder to spragging the cover a little, and then shift horizontally, the cover then could be open.
10. the sealed part use two level white silicone rubber for sealing.
11. The cover with feeding port and exhaust port( it can make hole according to customers)
12. the stirring barrel and motor could be fixed and with belt clamp device.
13.  There is bolts and screws on the motor plate for tightening and loosening the motor belt. Convenient for maintain.
14. There is silicon O-ring sealing instead of square sealing line at discharging block and cover for avoiding fall off.


15.  It can set discharge air cylinder to make sure discharge valve starts in a ray. With watch hole and blow hole, valve start limit spacing etc.
16. Air blows into the stirring barrel from the labyrinth seal. This kind of structure could avoid production entering shaft seal.
17.There is contactor switch on the barrel wall to make sure the stirring pot could only work after cover closed.
18. Main electricity elements use Siemens Brand. Temperature controller is OMRON or Holip. The electricity cabinet is simple and avoids dust.
19. Hot mixer is controlled by two speed motor, or 6 pole motor and ABB inverter.
20. There are vacuum powder loading system with dust collecting device, screw loader for optional.


- plastic machine pvc resin powder turbor mixer for extrusion,injection production line are used in mixing,stirring, drying, coloring materials in plastcs, rubber, and chemical industries. 
SHR series mixers adopt advanced design, so it is convenient and safe for operation. It offers small size, light weight, high efficiency, low energy consumption, and low noise.

 
Main Technical Parameters:        
             
 Model/data Capacity(L) Effective Capacity(L) Motor(L) Main shaft speed(rpm) Heating method Discharge method
 SHR-5A 5 3 1.1 1400 Self-friction Hand work
 SHR-10A 10 7 3 2000
 SHR-50A 50 35 7/11 750/1500 Electricy steam Pneumatics
 SHR-100A 100 75 14/22 650/1300
 SHR-200A 200 150 30/42 475/950
 SHR-300A 300 225 40/55 475/950
 SHR-500A 500 375 46/67 or 55/75 430/860
 SHR-800A 800 600 60/90 or 83/110 370/740
 SHR-200C 200 150 30/42 650/1300 Self-friction Pneumatics
 SHR-300C 300 225 47/67 475/950
 SHR-500C 500 375 83/110 500/1000
 SHR-800C 800 600 60/90 375/830
 SHR-1000C 1000 750 83/110 375/830
 SHR-2000C 2000 1500 160 960

 

Our door profiles roll forming machine include Door Frame Roll Forming Machine, window frame roll forming machine, steel rolling shutter door track roll forming machines. It can roll form different kinds metal door and window frames, reinforced, fire stop doors,ect. The punching also can be designed according to the clients' needs.After roll formed by this roll forming machine, the surface will be very smooth and beautiful without any scratch on surface. we also can do a custom roll forming machine, i.e. We can design the machine according to your specification and profile drawing.

Door Frame Roll Forming Machine

Door Frame Roll Forming Machine,Steel Door Frame Roll Forming Machine,Metal Door Frame Making Machines,Door Frame Machine, Galvanized Steel Door Frame Machine, Door And Window Frame Roll Forming Machine

Botou Kaiyite Cold Bending Machinery Co.,Ltd. , https://www.chinacoldbendingmachinery.com