Motorcycle Fuel Injector Tester & Cleaner and Analyzer 2 Cylinder

Model NO.: FIT-107T
Turning Speed Range: 0~15000r/Min
Timing Pulse Length: 0~9900times/Step Length 100
System Pressure: 0~0.6mpa
Output Scope of The Pulsed Signals: +5V, +12V
Working Temperature: 10°c~40°c
Warranty: One Year
Certificate: ISO 9001:2000 /ISO/Ts 16949
Frequency & Voltage: as Your Requirement
Trademark: crdt
Specification: CE
Origin: China
Model NO.: FIT-107T
Turning Speed Range: 0~15000r/Min
Timing Pulse Length: 0~9900times/Step Length 100
System Pressure: 0~0.6mpa
Output Scope of The Pulsed Signals: +5V, +12V
Working Temperature: 10°c~40°c
Warranty: One Year
Certificate: ISO 9001:2000 /ISO/Ts 16949
Frequency & Voltage: as Your Requirement
Trademark: crdt
Specification: CE
Origin: China
Motorcycle Fuel Injector Cleaner and Analyzer 2 Cylinder
It is one of the most popular injector cleaner and tester machine. It works on all kinds of Motorcycle electronic control system Injector and very popular machine for auto repair garage workshop. As an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.

Turning speed range: 0~15000r/min Ultrasonic cleaning power: 70W
Timing pulse length: 0~9900times/step length 100 Power supply: AC220+-10% 50/60Hz
Pulse length: 0-20ms step length 0.1ms Working temperature: 10°C~40°C
Timing: 0~10min Stimulant signals: 0+-5V 
System pressure: 0~0.6Mpa Output scope of the pulsed signals:

Motorcycle Fuel Injector Cleaner and Analyzer 2 Cylinder
It is one of the most popular injector cleaner and tester machine. It works on all kinds of Motorcycle electronic control system Injector and very popular machine for auto repair garage workshop. As an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.

Turning speed range: 0~15000r/min Ultrasonic cleaning power: 70W
Timing pulse length: 0~9900times/step length 100 Power supply: AC220+-10% 50/60Hz
Pulse length: 0-20ms step length 0.1ms Working temperature: 10°C~40°C
Timing: 0~10min Stimulant signals: 0+-5V 
System pressure: 0~0.6Mpa Output scope of the pulsed signals:

The Welding Neck Flange refers to a kind of flange with cone neck and butt welding with cylinder or pipe. It is an integral flange, suitable for high pressure, high temperature or high sealing requirements.

Welding Neck Flange

Carbon Steel Welding Neck Flange,Carbon Wn Flange,Raised Face Weld Neck Flange,Long Weld Neck Flange

Jinan Xintai Forging Co., Ltd , https://www.xtdzflange.com